|
|
The PT-Series transfer system dispenses products directly
from a mixing bowl or other container, thus eliminating frequent
and time consuming hopper refills. Some of its applications
are: filling cups, trays, pans, bottles and other containers
as well as depositing muffin, cupcake and pound cake batter,
pie fillings, topping Danish pastries, tarts etc.
The PT-Series power base can be used in two distinct modes:
- As a dosing transfer system, where the product can be
pumped directly from a large vat or mixing bowl (as seen
on left) and dispensed in metered quantities through a variety
of accessories and custom spout configurations.
- As a gravity fed system, where the product is placed
in a hopper and dispensed through a selection of accessories
and custom spout configurations.
The PT-Series is a completely portable system and consists
of two major components - a power base and a pump/filler unit.
When pumping from a large vat, the power base and pump assembly
may be placed on a table or our specially designed cart. The
suction tube, fitted with a check-valve on one end, extends
directly down to the bottom of the vat. The system may be
placed alongside a conveyor with a discharge spout configuration
extending over the moving conveyor.
When used as a hopper-feed system, the PT-Series may be placed
over a conveyor.
The power base has the same functions as our PV-Series, namely-speed
control, reversing, normal cycling, automatic cycling and
continuous dispensing.
There are two basic pumps available for the PT-Series. The
FT-Series is a gear-type pump (similar to FS-Series) and is
used to dispense smooth products. The FTR-Series is a lobe-type
pump (similar to RP-Series) designed to dispense lumpy material
as well as products containing particles (nuts, fruit, berries
etc.).
Photos feature (l to r): PT-Series complete with cart. PT-series
power base, FT-Series pump assembly, and FTR-Series filler
unit.
|
