|
We stock, service and supply all the major manufacturers of all
types, sizes and styles.
From Parry to Lincat, we carry all the latest ranges. All come fully
backed by Manufacturers warranty and the special equipment4catering
guarantee that you won't buy better or cheaper.
EDHARD - FILLER UNITS
|
|
|
F SERIES
These filler units are molded in clear, FDA approved polycarbonate.
They are available in single and double outlet configurations.
The single outlet is used to deposit smooth batters, cream
cheese, preserves etc. The double spout units are used to
inject donuts, eclairs, cream puffs etc.
Pump Configuration:
Gear type |
Hopper capacity/type:
6 qt. (5.5 l) polycarb.
18 qt. (17 l) polycarb. |
ORDER CODE: P-SERIES
|
|
|
|
|
FHP SERIES
This series filler unit is molded in clear, FDA approved
polycarbonate and is available in single outlet configuration
only. The FHP-Series is capable of dispensing liquid and semi-liquid
products and is an economical alternative to the FS-Series
filler units.
Pump Configuration:
Gear type |
Hopper capacity/type:
6 qt. (5.5 l) polycarb.
18 qt. (17 l) polycarb. |
ORDER CODE: PS-SERIES
|
|
|
|
|
FS SERIES
FS-Series filler units feature USDA approved 316 type stainless
steel construction and have a single outlet. They are used
to dispense liquid and semi-liquid products. Units equipped
with 18-quart stainless steel hoppers can be used with our
electrostatic heaters, which keep a product warm while it
is being dispensed.
Pump Configuration:
Gear type |
Hopper capacity/type:
6 qt. (5.5 l) polycarb.
18 qt. (17 l) polycarb.
10 qt. (9.5 l) st. steel
18 qt. (17 l) St. steel
36 qt. (32 l) St. steel |
ORDER CODE: PV-SERIES
|
|
|
|
|
RP SERIES
RP-Series filler units feature the same stainless steel construction
as the FS-Series. However, their distinguishing characteristic
is the nitrile-coated three-lobe impellers. This pump can
dispense viscous products, containing particles up to 3/8"
(10mm) diameter. The RP pump can dispense delicate products,
which can not be "overworked" while being pumped.
Pump Configuration:
Lobe type |
Hopper capacity/type:
6 qt. (5.5 l) polycarb.
18 qt. (17 l) polycarb.
10 qt. (9.5 l) St. steel
18 qt. (17 l) St. steel
36 qt. (32 l) St. steel |
ORDER CODE: PT-SERIES
|
|
|
|
